Working Hours

Monday - Friday
8.00 AM - 5:00 PM

Address

4641 Spring Road Brooklyn Heights, OH 44131

Why EvenMix®?

Compare EvenMix® to Other Mixers

We Design Our Mixers to be Low Weight

We design and make our mixers, we don't buy the components from overseas.  Our mixer systems were designed by a retired NASA Launch Engineer, Dan.  The entire system was designed in conjunction, to function as a balanced system.  That's why we have the lowest weight and highest control.  We designed it!

We Patented the Only 3D Mixing Blade

We asked paint, chemical, agriculture, food, and industrial companies for issues with mixing.  They had a lot!  Our Engineers solved the problems and designed the EvenMix® Blade.  It was revolutionary and had to be patented.  It mixes in 3D, unlike anything else.

No Vortex with EvenMix®

Our testing found that a vortex leads to air in the mix.  We created a mixing blade that mixes completely without introducing air to your mixture saving you time (no waiting for the bubbles to go out) and money (no de-foaming agent required).  Mix it right the first time!

Industries We Serve - Oil, Gas, and Mining

 EvenMix® IBC Tote Mixer Oil Gas and Mining

Oil Gas and Mining companies and service providers need mixing for three primary benefits:
  • Mix and Keep Chemicals in Solution
  • Even Distribution of Solids within a Tank
  • Safety as it relates to mixing potential explosive components

You need to get chemicals and solids mixed together or dispersed into water evenly and consistency.  Once you've gotten them mixed you need them to stay mixed.  We have the experience with designing and installing top mixers to get the job done complete and much more cost effectively than submersible or air mixers.  You pay a lot for the chemicals and additives you use and you need them to stay in suspension.  EvenMix® can easily be installed on an IBC or plastic tote as well as an open tank up to 5,000 gallons to mix the entire contents quickly and consistently.

Types of Mixers

Most mixers look like boat props and produce a lot of vertical flow.  These mixers are usually ran at high speeds and produce a deep vortex.  They sheer the product and introduce air into the liquid.  Others are impellers and produce only axial flow (outward horizontal flow).  These mixers don't create much circulation and don't mix much vertically.  Finally, there are pitched blades that have a constant pitch across the blade.  They produce a significant vertical flow and a deep vortex.  They don't accomplish much horizontal mixing and introduce a lot of air into the liquid.

EvenMix® and our patented mixing blades are uniquely designed not chop and blend the inputs we give them movement.  Our blade design creates a 3D circulation around the entire tank or vessel.  Our mixing blades create circulation down and then out creating a cycling motion from bottom to top and inside to out.  We used a NASA Engineer to design the optimum flow pattern for liquids to give you the best results.  Notice that EvenMix® blades have a variable pitch.  They begin at 90 degrees and bend gradually to 30 degrees at the end of the mixing blade.  This variable pitch is the patented feature and creates circulation without high speed, a vortex, or sheer which are all undesirable outcomes when mixing.

EvenMix® Blade Design

Our mixers are made of Stainless Steel 316 which is non-reactive to most chemicals, Steel, and Aluminum.  We have made modifications when necessary for customers.  Wilson Mining of Australia needed to avoid aluminum components in our mixers.  We had 2 housings that we needed to avoid.  No problem, we made the components from Stainless Steel.

We have integrated our mixers into all types of containers up to 5,000 gallons.  We can interface with NPT openings, flanges, Tri-Clamp Fittings, and many others.  Just call us to discuss your application at 440-236-6677.  Check out our online store to see the EvenMix® mixing system with both air and electric driven mixers.  Each mixing system has our patented mixing blades.