Why Even Mix™?

3D Mixing

Even Mix™ has a unique patented mixing blade design that mixes in 3D. We mix all the corners of a container and mix the entire container quickly and easily. Our mixers pump down to get into all corners.

Low Weight Mixers

Better engineering has our air powered mixer at 9 pounds and our electric powered mixer at 12 pounds. Most mixers weigh between 25 and 100 pounds. Make it easy on your employees and avoid safety issues.

Durable Performance

Built tough in the USA. We designed our mixing systems tough and make them in Cleveland. No imports. We get the job done right every time. Don’t settle for cheap Chinese components. Buy American made.

Compare Even Mix™ to Other Mixers

We Patented the Only 3D Mixing Blade

We asked paint, chemical, agriculture, food, and industrial companies for issues with mixing.  They had a lot!  Our Engineers solved the problems and designed the Even Mix™ Blade.  It was revolutionary and had to be patented.  It mixes in 3D, unlike anything else.

We Design Our Mixers to be Low Weight

We design and make our mixers, we don't buy the components from overseas.  Our mixer systems were designed by a retired NASA Launch Engineer, Dan.  The entire system was designed in conjunction, to function as a balanced system.  That's why we have the lowest weight and highest control.  We designed it!

No Vortex with Even Mix™

Our testing found that a vortex leads to air in the mix.  We created a mixing blade that mixes completely without introducing air to your mixture saving you time (no waiting for the bubbles to go out) and money (no de-foaming agent required).  Mix it right the first time!

Industries We Serve - Personal Care and CBD

 Even Mix IBC Tote Mixer Personal Care and CBD

Personal Care and CBD contract manufacturers and originators need high performance mixing with the following benefits:
  • Mix and Keep Solutions with a Variety of Rheology
  • Even and Consistent Distribution of Liquids Throughout the Container
  • Low Weight Equipment - Easy to Move

You need to mix your various inputs to create creams, lotions, or shampoos with an even and consistent makeup.  Once you've gotten them mixed you need them to stay mixed.  We have the experience supplying personal care product contract manufacturers, CBD manufacturers mixing CBD oils into lotion, and several hand sanitizer producers.  If you are beginning with a lotion or gel or introducing a thickening agent to produce a gel, we can help get you there.  You pay a lot for the chemicals and additives you use and you need them to be mixed completely and evenly.  Even Mix™ can easily be installed on an IBC or plastic tote as well as an open tank up to 5,000 gallons to mix the entire contents quickly and consistently.

Types of Mixers

Most mixers look like boat props and produce a lot of vertical flow.  These mixers are usually ran at high speeds and produce a deep vortex.  They sheer the product and introduce air into the liquid.  Others are impellers and produce only axial flow (outward horizontal flow).  These mixers don't create much circulation and don't mix much vertically.  Finally, there are pitched blades that have a constant pitch across the blade.  They produce a significant vertical flow and a deep vortex.  They don't accomplish much horizontal mixing and introduce a lot of air into the liquid.  We don't sheer and don't introduce air into your product.

Even Mix™ and our patented mixing blades are uniquely designed not chop and blend the inputs we give them movement.  Our blade design creates a 3D circulation around the entire tank or vessel.  Our mixing blades create circulation down and then out creating a cycling motion from bottom to top and inside to out.  We used a NASA Engineer to design the optimum flow pattern for liquids to give you the best results.  Notice that Even Mix™ blades have a variable pitch.  They begin at 90 degrees and bend gradually to 30 degrees at the end of the mixing blade.  This variable pitch is the patented feature and creates circulation without high speed, a vortex, or sheer which are all undesirable outcomes when mixing.

Even Mix Blade Design

Our mixers are made with non reactive and food grade Stainless Steel 316 on all of the wetted parts.  The mixer is sealed to insure that gear box grease doesn't make it into your product.  The components of the mixer are easy to disassemble, clean, and put back together.  Cross Contamination is a primary concern of your industry and we have an innovative product that you'll be interested in.  Our air or electric drive are able to be used with multiple mixers.  They are easy to connect and disconnect to mixers allowing the mixer to be dedicated to a specific product and avoiding cross contamination.

IBC Tote Mixer Agitator and Air Motor

Even Mix™ Blade - Avoids Cross Contamination

We have integrated our mixers into all types of containers up to 5,000 gallons.  We can interface with NPT openings, flanges, Tri-Clamp Fittings, and many others.  Just call us to discuss your application at 440-236-6677.  Check out our online store to see the Even Mix™ mixing system with both air and electric driven mixers.  Each mixing system has our patented mixing blades.